Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal and 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Wiper Motor Cover & Screws

Courtesy of GENERAL MOTORS CORP.

Position the wiper motor cover to the wiper motor.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the wiper motor cover screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).
Install the wiper drive system module. Refer to Wiper Drive System Module Replacement .
Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
Operate the windshield wipers and inspect for proper operation.