LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> Century Custom >> Repair and Diagnosis >> External Pages >> Different car >> Section 444 (Body Front End) >> Repair Instructions >> Hood Latch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal and 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Hood Latch
    GM363788Courtesy of GENERAL MOTORS CORP.
  1. Connect the hood latch release cable to the hood latch.
    2. Fig 2: Hood Latch & Support Bracket
    GM363798Courtesy of GENERAL MOTORS CORP.
  2. Position the hood latch to the marks on the hood latch support bracket.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the hood latch to center support bracket bolts.

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

  4. Adjust the hood, as required. Refer to Hood Adjustment .
  5. Close the hood.
scientia non olet · About LEMON Manuals