LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> Century Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 467 (Disc Brake System) >> Repair Instructions >> Disc Brake Hardware Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal and 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Caliper Pin Bolt, Bolt Boot & Bores
    GM793825Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the bores (3), the inside part of the bolt boot (2) and the caliper pin bolts (4) with GM P/N 18047666, or equivalent.
  2. Press the new caliper pin bolt boots into the caliper pin bores.
  3. Install the brake caliper bracket. Refer to Brake Caliper Bracket Replacement - Front .
    4. Fig 2: View Of Brake Pads, Brake Pad Retainers, & Caliper Bracket
    GM727742Courtesy of GENERAL MOTORS CORP.
  4. Install the brake pad retainers (1) to the caliper bracket.
  5. Install the brake pads (2) to the caliper bracket.
    6. Fig 3: View Of Brake Caliper And Caliper Bracket
    GM178630Courtesy of GENERAL MOTORS CORP.
  6. Remove the heavy mechanics wire (1) and install the brake caliper. Refer to Brake Caliper Replacement - Front .
scientia non olet · About LEMON Manuals