LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> Century Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Data Link Communications System >> Repair Instructions >> Data Link Connector Replacement >> Installation Procedure

Installation Procedure

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Position the data link connector to the instrument panel.
  2. Install the screws to the data link connector.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

    Fig 1: Installing Screws To Data Link Connector
    G01586902Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals