A/T Shift Lock Control Solenoid: Installation

1. Install the A/T shift lock control solenoid onto the steering column ball studs. See Fig 1 . Connect the electrical connector to the A/T shift lock control solenoid.
2. Install the steering column trim covers. See STEERING COLUMN TRIM COVERS  . Install the lower IP trim panel cover. See INSTRUMENT PANEL TRIM PANEL (LOWER)  . For solenoid adjustment, see SHIFT INTERLOCK SOLENOID  under ADJUSTMENTS.

Fig 1: Removing & Installing Shift Lock Control Solenoid

Courtesy of GENERAL MOTORS CORP.