LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2002 >> Park Avenue Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 488 (Seat System) >> Repair Instructions >> Memory Seat Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Buick Park Avenue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the memory seat module (1) and the bracket.
    Fig 1: Installing Memory Seat Module And Bracket
    G01525624Courtesy of GENERAL MOTORS CORP.
  2. Install the 2 rear fasteners to the bracket.
  3. Connect the electrical connector.
  4. Install the seat.
    NOTE: Refer to FASTENER NOTICE .
  5. Install the seat anchor bolts.

    Tighten 

    Tighten the seat anchor bolts to 41 N.m (30 lb.ft).

  6. Install the 2 front fasteners to the bracket.
  7. Install the front track cover.
scientia non olet · About LEMON Manuals