Installation Procedure
WARNING: This page is about a different car, the 2003 Buick Park Avenue. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the yaw rate sensor electrical connector (3).
- Install the yaw rate sensor.NOTE: Refer to FASTENER NOTICE .
- Install the yaw rate sensor nuts (1).
Tighten
Tighten the yaw rate sensor mounting nuts (1) to 6 N.m (53 lb in).
- Install the rear shelf trim panel. Refer to TRIM PANEL REPLACEMENT - REAR WINDOW SHELF in Interior Trim.
- Install the rear compartment trim. Refer to COMPARTMENT TRIM PANEL REPLACEMENT - REAR in Body Rear End.
- Perform the ABS Diagnostic System Check. Refer to DIAGNOSTIC SYSTEM CHECK-ABS .