LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2002 >> Park Avenue Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Repair Instructions >> Yaw Rate Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Connect the yaw rate sensor electrical connector (3).
  2. Install the yaw rate sensor.
  3. Install the yaw rate sensor nuts (1). Tighten the yaw rate sensor mounting nuts (1) to 6 N.m (53 in lbs).
  4. Install the rear shelf trim panel.
  5. Install the rear compartment trim.
  6. Perform the ABS Diagnostic System Check. Refer to DIAGNOSTIC SYSTEM CHECK - ABS .
scientia non olet · About LEMON Manuals