LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2002 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control System >> Repair Instructions >> Instrument Panel Module Replacement >> Installation Procedure

Installation Procedure

  1. Install the instrument panel module (IPM) (1) to the vehicle.
  2. Connect the electrical connectors to the IPM (1).
  3. Install the IPM (1) to the IP retainer by inserting the top tab of the module into the slot on the IP retainer and rotating down.
    Fig 1: IPM And Electrical Connectors
    G01743071Courtesy of GENERAL MOTORS CORP.
  4. Install the fastener.

    Tighten: 

    Tighten fastener to 2 N.m (18 in. Lb.) 

  5. Install the left closeout/insulator panel.
scientia non olet · About LEMON Manuals