LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2002 >> Century Custom >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Adjustment Procedures >> Repair Instructions >> Front Camber Adjustment >> Removal Procedure

Removal Procedure

  1. Raise the vehicle and provide suitable support.
  2. Remove the tire and wheel assemblies from the front and the rear axles. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION .
  3. Remove the strut from the vehicle. Refer to STRUT, STRUT COMPONENT AND/OR SPRING REPLACEMENT .
  4. Place the strut in a vise and file the hole lateral-oblong. Compare the appearance of the holes before filing (2) with after filing (3).
    Fig 1: Filing Strut Holes
    G01720496Courtesy of GENERAL MOTORS CORP.
  5. File the lower strut-to-knuckle attaching hole for a front camber adjustment.
scientia non olet · About LEMON Manuals