LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2002 >> Century Custom >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

  1. Connect the electrical connector to the power front seat switch.
    Fig 1: Installing Power Front Seat Switch Electrical Connector
    G01756139Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the screws to the seat switch to the trim panel. Tighten the screws to 3 N.m (27 lb in).
  3. Fig 2: Installing Seat Switch
    G01756140Courtesy of GENERAL MOTORS CORP.
  4. Install the front seat cushion outer trim panel. Refer to Trim Panel Replacement - Front Seat .