Theft Deterrent Control Module Replacement: Removal

1. Disable air bag system. See appropriate AIR BAG RESTRAINT SYSTEMS article.
2. Remove steering column trim covers. See STEERING COLUMN TRIM COVERS  .
3. Remove wire harness assembly (4) out of wire harness strap (5). See Fig 1 .
4. Remove wire harness straps (3) from wire harness assembly.
5. Remove wire harness strap (2) from upper tilt head assembly (1).
6. Disconnect theft deterrent module electrical connector.
7. Remove theft deterrent module (2) from ignition lock module assembly. See Fig 2 .

Fig 1: Identifying Wiring Harness Straps

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing Theft Deterrent Module

Courtesy of GENERAL MOTORS CORP.