Programming Security Feedback Using Driver Information Center: LeSabre

To enter programming mode, perform following:

1. Turn ignition switch to RUN position. Keep transaxle in Park. Inform Driver Information Center (DIC) which driver is to be programmed by pressing unlock button on appropriate transmitter.
2. Press and hold ENG/MET button for 5 seconds, WELCOME TO BUICK OPTION FEATURE will appear in DIC display. Next display is DIVER ID 1 or 2. DIC is now ready to program personal options.
3. To change an option, use ENG/MET button to toggle between choices. Press RESET button to move to next feature. Pressing unlock button on transmitter will return to beginning of feature list. Turning ignition switch to OFF position or pressing any other button on DIC will exit programming mode.