Code Enable Criteria

DTC will run under the following conditions:

• Transaxle is not in Park or Neutral.
• DTCs P0106, P0107, P0108, P1106, P1107, P0121, P0122, P0123, P0716, P0717 or P1810 are not present.
• Input shaft speed is more than 1500 RPM.
• Throttle angle is more than 12 percent.
• Engine torque is 40-150 ft. lbs (54-203 N.m).

DTC will set when output shaft speed is less than 150 RPM for 2.5 seconds.