LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2000 >> Regal GS >> Repair and Diagnosis >> External Pages >> Different car >> Section 489 (Cruise Control System) >> Repair Instructions >> Cruise Release Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cruise release switch to the cruise release switch retainer on the brake pedal bracket.
  2. Connect the cruise release switch electrical connector.
  3. Adjust the cruise release switch. Refer to CRUISE RELEASE SWITCH ADJUSTMENT  .
  4. Install the left side instrument panel insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT in Instrument Panel, Gages and Console.
    Fig 1: Installing Cruise Release Switch To Cruise Release Switch Retainer On Brake Pedal Bracket
    G01503800Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals