Memory Seat & Mirrors

Remote Keyless Entry (RKE) transmitters can be programmed to allow activation of memory seat and mirrors to memory position No. 1, memory position No. 2, exit mode or disable memory feature. Perform the following steps to program memory seat and mirror positions for each RKE transmitter. Each RKE transmitter may be set for different memory position functions.

NOTE: Make sure SEAT RECALL feature is turned on in Driver Information Center (DIC) PERSONAL CHOICE FEATURES. See REMOTE KEYLESS ENTRY SYSTEMS - PARK AVENUE

Adjust seat and mirrors to desired positions. Press desired position (No. 1 or No. 2, use number on RKE transmitter) for more than 3 seconds (verified by 2 beeps).
Adjust seat to desired exit position. Press EXIT button for more than 3 seconds (verified by 2 beeps). In DIC PERSONAL CHOICE FEATURES under SEAT RECALL select MEMORY or EXIT options.

To disable memory seat and mirror mode, turn off SEAT RECALL in DIC PERSONAL CHOICE FEATURES.