LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
  • Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
  • Always route the replacement cable the same way as the original cable.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Fig 1: View of Negative Battery Cable & Body Harness
    GM154782Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the body harness from the battery negative cable.
  4. Disconnect the battery negative cable from the floor pan.
  5. Remove the battery negative cable from the vehicle.