Scan Tool Data List

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.

Dash Integration Module (DIM)

Scan Tool Parameter	Data List	Units Displayed	Typical Data Value
Ignition ON/Engine Running
Battery Voltage	Data	Volts	12.6 Volts

Drivers Door Module (DDM)

Scan Tool Parameter	Data List	Units Displayed	Typical Data Value
Ignition ON/Engine Running
Battery Voltage	Data	Volts	12.6 Volts

Instrument Panel Cluster (IPC)

Scan Tool Parameter	Data List	Units Displayed	Typical Data Value
Ignition ON/Engine Running
Battery Voltage	Data	Volts	12.6 Volts
Volt Lamp	Outputs	On/Off	Off

Rear Integration Module (RIM)

Scan Tool Parameter	Data List	Units Displayed	Typical Data Value
Ignition ON/Engine Running
Battery Voltage	Data	Volts	12.6 Volts
Inadvertent Power Input	Input	On/Off	On
Inadvertent Power Relay	Outputs	On/Off	On
Load Shed Lvl.1 R. Defog.	Outputs	On/Off	Off
Load Shed Lvl.1 Heated Seats	Outputs	On/Off	Off
Load Shed Lvl.2 R. Defog.	Outputs	On/Off	Off
Load Shed Lvl.2 Heated Seats	Outputs	On/Off	Off

Powertrain Control Module (PCM)

Scan Tool Parameter	Data List	Units Displayed	Typical Data Value
Ignition ON/Engine OFF
GEN F-Terminal Signal	Engine Data 2	%	0%
GEN L-Terminal Signal Command	Engine Data 2	On/Off	Off
Ignition 1 Signal	Engine Data 1, Engine Data 2	Volts	12.6 Volts
Starter Enable Relay Circuit Status	Outputs	OK/Fault/Invalid State	OK
Starter Relay Command	Engine Data 2	On/Off	Off

Transmission Control Module (TCM)

Scan Tool Parameter	Data List	Units Displayed	Typical Data Value
Ignition ON/Transmission in Park
IMS	Transmission Data	Park, Park/Reverse, Reverse, Reverse/Neutral, Neutral, Neutral/Drive 4, Drive 4, Drive 4/Drive 3, Drive 3, Drive 3/Drive 2, Drive 2, Drive 2/Drive 1, Drive 1, INVALID, OPEN	Park