LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Engine Controls - Introduction) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Air Cleaner Housing
    GM444479Courtesy of GENERAL MOTORS CORP.
  1. Install the lower air cleaner assembly (1) into the 2 rubber grommets (2) in the engine compartment.
    2. Fig 2: View Of Air Cleaner Housing, Bolts, PCM & Harness
    GM444496Courtesy of GENERAL MOTORS CORP.
  2. Carefully install the PCM (4) and the harness into the lower air cleaner housing (3).
  3. Install the upper air cleaner housing assembly (1).
  4. Install the 2 screws (2) into the upper and lower air cleaner assembly sections.

    Tighten:  Tighten the screws to 4 N.m (35 lb in).

  5. Install the intake duct. Refer to Air Cleaner Intake Duct Replacement .
scientia non olet · About LEMON Manuals