LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Side Impact Module Wiring Harness Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Inflatable Restraint Side Impact Inflator Module, Seat, Seat Back Cover, and Wiring Harness
    GM498670Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to SIR Inflator Module Handling and Storage Caution in Cautions and Notices.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7  or to SIR Disabling and Enabling Zone 9 .
  2. Removal of passenger or driver inflatable restraint side impact inflator module wiring harness uses the same procedure.
  3. Remove the inflatable restraint side impact inflator module (2) from seat (1). Refer to Inflatable Restraint Side Impact Module Replacement - Front  for removal.
  4. With seat back cover (3) in the open position the inflatable restraint side impact inflator module wiring harness (4) will be expose.
  5. Remove the retaining clips that secure the side impact inflator module wiring harness (4) to seat (1).
scientia non olet · About LEMON Manuals