LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Door System, Mirror System & Window System) >> Repair Instructions >> Power Door Lock Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removal of Power Door Lock Switch With Flat Bladed Tool
    GM508148Courtesy of GENERAL MOTORS CORP.
  1. Remove the inside door handle bezel. Refer to Handle Bezel Replacement - Inside .
  2. Disconnect the electrical connector.
  3. Remove the power door lock switch by releasing the lock tabs on the door handle bezel with a small flat bladed tool.
scientia non olet · About LEMON Manuals