LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/M15 >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Body Front End) >> Repair Instructions >> Fender Replacement-Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: When removing body panels, apply tape to corners of panel and adjacent surfaces to help prevent paint damage.
  1. Remove the rocker molding. Refer to MOLDING REPLACEMENT-ROCKER PANEL in Exterior Trim.
  2. Remove the air deflector. Refer to AIR DEFLECTOR REPLACEMENT-FRONT .
  3. Remove the fascia to fender fasteners. Refer to FASCIA REPLACEMENT - FRONT BUMPER .
  4. Remove the fender fasteners (2).
    Fig 1: Removing Fender Fasteners
    G01743417Courtesy of GENERAL MOTORS CORP.
  5. Remove the fender (1) from the vehicle.
scientia non olet · About LEMON Manuals