Installation Procedure

WARNING: This page is about a different car, the 2002 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.

Install the rear seat shoulder belt retractor.

Fig 1: Rear Seat Shoulder Belt Retractor
Courtesy of GENERAL MOTORS CORP.
Install the rear seat shoulder belt retractor fastener.
Tighten:

Tighten the rear seat shoulder belt retractor fastener to 41 N.m (30 ft lbs)
Verify that the belt is not twisted.
Align the anchor plate between the dimples in the floor pan with the plate facing forward.
Install the anchor fastener.
Tighten

Tighten the rear seat outer lower fastener to 41 N.m (32 ft lbs)

Fig 2: Anchor Fasteners
Courtesy of GENERAL MOTORS CORP.
Install the rear shelf trim panel. Refer to TRIM PANEL REPLACEMENT-REAR WINDOW SHELF in Exterior/Interior Trim .
Install the rear seat back. Refer to SEAT BACK REPLACEMENT-REAR in Seats .
Install the rear seat cushion. Refer to SEAT CUSHION REPLACEMENT - REAR in SEATS .