LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/M15 >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Seat Belt System) >> Repair Instructions >> Seat Belt Replacement-Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear seat belt retractor. Refer to Seat Belt Retractor Replacement-Rear 
  2. Install the rear seat belt anchor fastener to the floor.

    Tighten: 

    Tighten the anchor fastener to 41 N.m (30 ft lbs) 

    Fig 1: Rear Seat Belt Anchor Fastener To Floor
    G01744127Courtesy of GENERAL MOTORS CORP.
  3. Install the rear seat cushion. Refer to SEAT CUSHION REPLACEMENT - REAR in SEATS .
  4. Install the rear shelf trim panel. Refer to TRIM PANEL REPLACEMENT-REAR WINDOW SHELF in Exterior/Interior Trim .
scientia non olet · About LEMON Manuals