LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/M15 >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement-Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear seat belt buckle anchor plate under the rear seat back hold-down.
    NOTE: Assure that the fastener threads and fastener hole are free of any sealer patch material.
  2. Install the rear seat center belt and RH rear seat buckle anchor fastener. Ensure the center belt anchor is facing rearward and the center buckle anchors are facing towards the rear.

    Tighten: 

    Tighten the rear seat center belt and rear seat buckle anchor fasteners to 41 N.m (32 ft lbs). 

  3. Ensure the seat belt buckles are stowed in the seat back pockets and install the rear seat cushion. Refer to SEAT CUSHION REPLACEMENT - REAR in SEATS .
    Fig 1: Installing Seat Belt Buckle Components
    G01744117Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals