LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/M15 >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (HVAC System - Automatic) >> System Tests >> A/C System Performance

A/C System Performance

WARNING: This page is about a different car, the 2001 Pontiac Bonneville and 2000 Pontiac Bonneville. However, it is still accessible from the selected car via links, so may be relevant.
  1. Park vehicle out of direct sunlight. Ambient temperature must be at least 43°F (6°C). Install manifold gauge set. Start engine. Turn A/C on. Place A/C control to maximum cooling, selector lever on full cold and blower switch on HIGH. Close vehicle doors and windows.
  2. Insert thermometer in center air outlet. Run engine at idle for 5 minutes. Measure temperature and system pressures. Temperatures and pressures should be within correct range. See A/C SYSTEM PERFORMANCE TEMPERATURE SPECIFICATIONS  and A/C SYSTEM PERFORMANCE PRESSURE SPECIFICATIONS  .
A/C SYSTEM PERFORMANCE TEMPERATURE SPECIFICATIONS

Ambient Temp. - °F (°C) (1) Outlet Vent Temp. - °F (°C)
60 (16) 49 (9)
70 (21) 52 (11)
80 (27) 55 (13)
90 (32) 60 (16)
100 (38) 65 (18)
110 (43) 71 (22)
120 (49) 73 (23)
(1) With relative humidity at 40 percent or more.
A/C SYSTEM PERFORMANCE PRESSURE SPECIFICATIONS

Ambient Temp. - °F (°C) (1) High Side - psi (kg/cm2 ) Low Side - psi (kg/cm2 )
60 (16) 130-160 (9.1-11.2) 28-34 (2.0-2.4)
70 (21) 175-205 (12.3-14.4) 34-40 (2.4-2.8)
80 (27) 180-210 (12.7-14.8) 37-43 (2.6-3.0)
90 (32) 180-210 (12.7-14.8) 41-47 (2.9-3.3)
100 (38) 225-265 (15.8-18.6) 53-63 (3.7-4.4)
110 (43) 255-295 (17.9-20.7) 58-68 (4.1-4.8)
(1) With relative humidity at 40 percent or more.