Scan Tool Output Controls

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.

Scan Tool Output Controls - Dash Integration Module (DIM)

Scan Tool Output Control	Additional Menu Selection(s)	Description
Daytime Running Lamps	After selecting module, select Special Functions and then select Output Controls	The DIM actuates the daytime running lamps for 5 seconds. The daytime running lamps should illuminate for 5 seconds.
Horn Relay	After selecting module, select Special Functions and then select Output Controls	The DIM actuates the horn relay for 5 seconds. The horn should sound for 5 seconds.
Park Lamp Relay	After selecting module, select Special Functions and then select Output Controls	The DIM actuates the Park Lamp Relay for 5 seconds. The park lamps should illuminate for 5 seconds.

Scan Tool Output Controls - Drivers Door Module (DDM)

Scan Tool Output Control	Additional Menu Selection(s)	Description
Driver Lock	After selecting module, select Special Functions, Output Controls and then select Door Lock test	The DDM momentarily pulses the door lock actuator when LOCK or UNLOCK is selected. The door should LOCK or UNLOCK when the corresponding selection is made.
Passenger Lock	After selecting module, select Special Functions, Output Controls and then select Door Lock test	The DDM momentarily pulses the door lock actuator when LOCK or UNLOCK is selected. The door should LOCK or UNLOCK when the corresponding selection is made.
Left Rear Lock	After selecting module, select Special Functions, Output Controls and then select Door Lock test	The DDM momentarily pulses the door lock actuator when LOCK or UNLOCK is selected. The door should LOCK or UNLOCK when the corresponding selection is made.
Right Rear Lock	After selecting module, select Special Functions, Output Controls and then select Door Lock test	The DDM momentarily pulses the door lock actuator when LOCK or UNLOCK is selected. The door should LOCK or UNLOCK when the corresponding selection is made.

Scan Tool Output Controls - Instrument Panel Cluster (IPC)

Scan Tool Output Control	Additional Menu Selection(s)	Description
Operating Conditions: Ignition ON, Engine OFF
Display(s) Test	After selecting module, select Special Functions and then select Output Controls	The IPC can be activated when you select ON or OFF. When selecting ON the back lighting will illuminate, the gauges will sweep one time and the indicators will illuminate for 5 seconds. When selecting OFF the IPC will turn OFF all functions.