LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/M15 >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Automatic Transaxle - Introduction & Repair Instructions) >> Repair Instructions >> Final Drive Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Assembling Differential Carrier
    GM214412Courtesy of GENERAL MOTORS CORP.
  1. Assemble the sun gear thrust bearing (698), the differential carrier sun gear (697), the park gear (696), the internal gear thrust bearing (695) and the sun gear shaft (689) into the differential carrier (700).
    2. Fig 2: Installing Differential Carrier
    GM214413Courtesy of GENERAL MOTORS CORP.
  2. Install the differential carrier into the case.
  3. Install new output shaft snap ring.
  4. Install the case extension housing. Refer to Case Extension Housing Replacement .
scientia non olet · About LEMON Manuals