LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/M15 >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Automatic Transaxle - Introduction & Repair Instructions) >> Repair Instructions >> Control Valve Body Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the case side cover. Refer to Case Side Cover Replacement .
    2. Fig 1: Wiring Harness
    GM97350Courtesy of GENERAL MOTORS CORP.
  2. Remove the wiring harness as necessary.
  3. Remove the oil pump. Refer to Oil Pump Replacement .
    4. Fig 2: Identifying Valve Body Bolts
    GM164796Courtesy of GENERAL MOTORS CORP.
  4. Remove the valve body to channel plate bolts (374-381, 384).
    5. Fig 3: Valve Body
    GM97400Courtesy of GENERAL MOTORS CORP.
  5. Remove the valve body. Leave the spacer plate with the transmission.
    6. Fig 4: Spacer Plate & Gasket
    GM97402Courtesy of GENERAL MOTORS CORP.
  6. Remove the spacer plate and the spacer plate gasket, as necessary.
  7. Remove the solenoid screens.
scientia non olet · About LEMON Manuals