LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/M15 >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Interior Trim) >> Repair Instructions >> Assist Handle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Assist Handle
    GM258814Courtesy of GENERAL MOTORS CORP.
  1. Position the assist handle (2) in the headliner.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the fasteners (1) in order to secure the assist handle.

    Tighten:  Tighten the fasteners to 3 N.m (27 lb in).