Steering Column: Reassembly

To reassemble, reverse disassembly procedure. Apply a thin coat of lithium-based grease to all friction points when reassembling. Before installing lock cylinder, ensure sector is in RUN position. Place key in lock cylinder, align locking tab with housing and press into position.

Fig 1: Inspecting Steering Column Bracket

Courtesy of GENERAL MOTORS CORP.

Fig 2: Measuring Steering Column Jacket

Courtesy of GENERAL MOTORS CORP.

Fig 3: Inspecting Steering Shaft

Courtesy of GENERAL MOTORS CORP.

Fig 4: Exploded View Of Tilt Steering Column Assembly - Column & Floor Shift (Century & Regal)

Courtesy of GENERAL MOTORS CORP.

Fig 5: Exploded View Of Tilt Steering Column Assembly - Column & Floor Shift (Grand Prix)

Courtesy of GENERAL MOTORS CORP.