Dismounting/Mounting Procedures

CAUTION: The tire should be dismounted from the wheel using the tire changer manufacturer's instructions. Use the following information to avoid damage during the dismounting/mounting procedures.

NOTE: If vehicle's tires are replaced with those not having a TPC Spec number, the TPM system may give an inaccurate low pressure warning. Non-TPC Spec tires may give a low pressure warning that is higher or lower than the proper warning level achieved by TPC Spec numbered tires.

NOTE: When a spare tire is mounted, a wheel is replaced or rotated, tire pressure has been adjusted, or vehicle's battery has been disconnected, TPM system will need to be recalibrated. See TIRE PRESSURE MONITOR SYSTEM RECALIBRATION under RESET PROCEDURES.