Section 6 (Engine Controls - Specifications - 3.1L): Capacities

WARNING: This page is about a different variant/trim than selected.

BATTERY SPECIFICATIONS

Application	Cold Crank Amps @ 0°F (-18°C)	Reserve Capacity Minutes
3.1L	600	90

FLUID CAPACITY (CRANKCASE) ⁽¹⁾

Application

⁽²⁾ Quantity Qts. (L)

3.1L

4.5 (4.2)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	Includes oil filter capacity.

FLUID CAPACITY (COOLING SYSTEM) ⁽¹⁾

Application

⁽²⁾ Quantity Qts. (L)

3.1L

13.6 (12.9)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	Includes heater.

FLUID CAPACITY (AUTOMATIC TRANSAXLE/TRANSMISSION) ⁽¹⁾⁽²⁾

Application

⁽³⁾ Quantity Qts. (L)

3T40

4.0 (3.8)

4T40-E

6.9 (6.5)

4T60-E & 4T65-E

7.4 (7.0)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	Drain and refill capacity only. Does not include torque converter.

⁽³⁾	Dexron-III or Dexron-IIE.