Cruise Control Release Switch & Brake Switch Adjustment
WARNING: This page is about a different car, the 1998 Oldsmobile Cutlass, 1998 Chevrolet Malibu, 1997 Oldsmobile Cutlass, and 1997 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Remove left side "A" pillar defogger duct from beneath instrument panel. Twist switch counterclockwise to release from retainer. With switch electrical connector toward one o'clock position, slide switch into retainer until switch plunger is fully depressed into switch barrel. Twist switch clockwise until travel stop is reached. When switch is fully locked, electrical connector should face 3 o'clock position. Install left side "A" pillar defogger duct.