Cruise Control Cable Adjustment
WARNING: This page is about a different car, the 1998 Oldsmobile Cutlass, 1998 Chevrolet Malibu, 1997 Oldsmobile Cutlass, and 1997 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
On 3.1L engine, DO NOT remove adjustment lock from cruise control cable. If adjustment lock is removed from cable, cruise control cable must be replaced.
On 3.1L engine, disengage adjustment lock tab on cruise control cable by lifting straight up. Cable should move freely in and out of adjuster. Hold throttle at closed position. Move cable in and out of adjuster to remove any slack. Cruise control throttle body cam will rest against throttle lever when cable is properly adjusted. Push down to engage adjustment lock. Ensure throttle returns to closed position. On 2.4L engine, hold throttle at closed position and adjust thumb screw to remove any slack.