LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1998 >> Century Custom >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Module >> Diagnostic Tests >> DTC U1096: Instrument Panel Class 2 Source Id 60 >> Description

DTC U1096: Instrument Panel Class 2 Source Id 60: Description

BCM receives a state of health message from each module whose source ID it has learned. DTC U1096 will set when BCM does not receive a state of health message from Instrument Panel Cluster (IPC). No driver warning message will be displayed.

Under all fault conditions, ignition switch must be cycled from LOCK/OFF to RUN position before a current code will change to a history code. A current DTC U1096 will change to a history code when BCM receives a state of health message from IPC. If conditions for malfunction no longer exist, history DTC will clear after 100 consecutive ignition cycles. DTC U1096 will also clear when scan tool is used to clear codes.

NOTE: When ignition switch is turned to RUN position with BCM disconnected, PCM-related DTC P1626 will be set. After BCM repair is completed, see appropriate TESTS W/CODES article in ENGINE PERFORMANCE section:
scientia non olet · About LEMON Manuals