LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1998 >> Century Custom >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Removal & Installation >> Wiper Transmission Linkage Assembly & Drive Module System >> Removal & Installation

Removal & Installation

  1. Remove wiper arms. See WIPER ARMS  under REMOVAL & INSTALLATION. Remove air inlet screen. Disconnect washer hose from nipple. Disconnect wiper motor electrical connector. Using Separator J-39232, disconnect wiper transmission assembly from crank arm. Remove 3 screws and wiper drive system module.
  2. Remove 2 caps from wiper transmission assembly. Remove 4 screws and wiper transmission assembly from tube frame. Remove grommets from tube frame. Remove wiper motor assembly from tube frame. To install, reverse removal procedure. Ensure wiper arms are correctly positioned. See WIPER ARMS  under ADJUSTMENTS. Check wipers for proper operation.
scientia non olet · About LEMON Manuals