Park Lock Cable
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.
NOTE:
Park lock cable adjustment information for some models not available at time of publication. With gearshift lever in "P" position and ignition switch in LOCK position, ensure gear selector lever cannot be moved to any other position. Ignition key should be removable.
- Remove center console to expose park lock cable connector lock. Place gearshift lever in Park. Turn ignition switch to LOCK position.
- Pull park lock cable connector lock button up to unlock. Push cable connector nose forward to remove slack. Snap park lock cable connector lock button down into place. Check park lock cable operation.
- Ensure ignition key can be removed with gearshift lever in Park only and gearshift lever cannot be moved from Park with ignition switch in LOCK position.