LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1997 >> Century Custom >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Removal & Installation >> Strut Assembly >> Installation

Strut Assembly: Installation

To install, reverse removal procedure. If reusing old struts, align marks made at strut and knuckle during removal. In any case, tighten fasteners to specification. See TORQUE SPECIFICATIONS  table. If new struts were installed, align rear wheels. See SPECIFICATIONS & PROCEDURES article in WHEEL ALIGNMENT.



To install, reverse removal procedure. If reusing old struts, align marks made at strut and knuckle during removal. In any case, tighten fasteners to specification. See TORQUE SPECIFICATIONS  table. If new struts were installed, align rear wheels. See SPECIFICATIONS & PROCEDURES article in WHEEL ALIGNMENT.

scientia non olet · About LEMON Manuals