DTC B0823, Doors G201 Circuit (Open): Notes
BCM receives ground for door locks through circuit No. 1750 (Black wire). DTC B0823 will set when BCM detects an open in circuit No. 1750 (Black wire) or is open internally for more than 0.3 second. No driver warning message will be displayed.
If conditions for malfunction no longer exist, history DTC will clear after 100 consecutive ignition cycles. DTC B0823 will also clear when conditions no longer exist or scan tool is used to clear codes.
NOTE:
If DTC B0823 is a history code, problem may be intermittent. Wiggle wires while performing the following test.
NOTE:
When ignition switch is turned to RUN position with BCM disconnected, PCM related DTC P1626 will be set. After BCM repair is completed, see appropriate TESTS W/CODES
article in ENGINE PERFORMANCE section. Refer to menu below.