LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1996 >> Roadmaster Limited >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal & Installation >> Wheel Speed Sensor >> Installation

Wheel Speed Sensor: Installation

  1. To install, reverse removal procedure. Coat steering knuckle and speed sensor with Anti-Corrosion Compound (12345489) before installing. DO NOT use grease. Tighten sensor mounting bolt to specification. See TORQUE SPECIFICATIONS .
  2. Ensure wiring harness is routed in original location and properly installed in retainers. Sensor air gap is not adjustable.


  1. To install, reverse removal procedure. Sensor fits tightly into rear axle housing. DO NOT use force to install sensor. Use hand pressure only.
  2. Tighten sensor mounting bolt to specification. See TORQUE SPECIFICATIONS . Ensure wiring harness is routed in original location and properly installed in retainers. Sensor air gap is not adjustable.
scientia non olet · About LEMON Manuals