LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1994 >> Roadmaster Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - BOSCH 2U >> Bleeding Brake System >> Manual Bleeding Procedure

Manual Bleeding Procedure

  1. With engine off, remove reserve vacuum by applying brakes several times. Fill master cylinder with brake fluid and keep reservoir at least one-half full during bleeding procedure.
  2. Starting at right rear wheel, place proper size box end wrench over bleeder valve. Attach one end of clear tube over valve and submerge other end in container partially filled with clean brake fluid.
  3. Have an assistant slowly depress and hold brake pedal. Loosen bleeder valve to purge air from cylinder. Tighten bleeder valve and slowly release brake pedal. Repeat sequence until all air is removed.
  4. Remove tube and wrench. Proceed to left rear, right front and left front wheels in this order. Fill master cylinder reservoir, and install cover.
scientia non olet · About LEMON Manuals