LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1994 >> Regal Limited >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Ignition Module (Dis) >> Removal & Installation (3.1L & 3.4L)

Removal & Installation (3.1L & 3.4L)

  1. Disconnect negative battery cable. Disconnect connectors at ignition module. See Fig 1. Disconnect spark plug wires from coil pack. Remove coil pack/ignition module assembly. For ignition module location, see COMPONENT LOCATIONS in appropriate I - SYS/COMP TESTS article in this section below. Separate ignition coil(s) from ignition module (if possible).
  2. To install, reverse removal procedure. Tighten ignition module mounting bolts/nuts. Tighten mounting bolts/nuts to specification. See appropriate TORQUE SPECIFICATIONS .
Fig 1: Locating Distributorless Ignition Module Components
G7834Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals