Air Bag System

Observe the following precautions when working with air bag systems:

• Before performing any repairs, disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM.
• After air bag system is disabled, wait 2 MINUTES (1993 1/2 year models and later) before working on vehicle, as energy reserve module retains sufficient voltage to deploy air bag.
• Handle air bag sensor carefully to avoid injury. DO NOT strike or jar sensor, as air bag deployment or improper operation of air bag system could result. Replace sensor if dropped from a height of 2 feet or more.
• Sensors and mounting bracket bolts must be carefully torqued to ensure correct operation. DO NOT activate air bag system if any sensor is not rigidly attached to vehicle.
• When carrying a live inflator module, ensure bag and trim cover are pointed away from body. This reduces chance of injury in case of accidental air bag deployment.
• When placing a live inflator module on a bench or other surface, always face bag and trim cover up, away from surface. NEVER carry any air bag system component by wires or connector.