Test Dd - Traction Off Indicator Test
- Perform ABS/TCS functional check before proceeding. See Figure . Turn ignition off. Disconnect EBTCM connector. Connect Pinout Box (J-38716). Turn ignition on. Connect fused jumper wire between pinout box pins No. 1 and 44. See Figure . TRACTION OFF indicator should be on. If TRACTION OFF indicator is on, circuit is functioning properly.
- If TRACTION OFF indicator light is off, check for open in circuit No. 1572 (Purple/White wire). Check EBTCM connector terminal No. 44 (Purple/White wire) for proper contact. Check instrument cluster terminal No. 10 Purple/White wire for proper contact. If Purple/White wire and contacts are okay, replace EBTCM. After all repairs are complete, clear codes, and repeat ABS/TCS functional check. See Figure .