LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1993 >> Roadmaster Base >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> On-Vehicle Testing >> Solenoid Windings Tests >> Hold-In Windings Test

Hold-In Windings Test

Connect an ammeter in series with 12-volt battery and terminal "S" on starter solenoid. See Figure . Connect a voltmeter between solenoid terminal "S" and ground. Connect a carbon pile rheostat across battery. Adjust voltage to 10 volts and check amperage reading. See HOLD-IN WINDINGS SPECIFICATIONS  .

scientia non olet · About LEMON Manuals