LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1992 >> Skylark Base, 4D Sedan, 2.3 3 >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Window Control Module >> Removal

Window Control Module: Removal

  1. Remove driver's door trim panel. See DOOR TRIM PANEL  .
  2. Remove driver's door water deflector. See WATER DEFLECTOR  .
  3. Disconnect wiring connector (4). See Figure .
  4. Release tab (3) on module (2) and slide module out of bracket (1).
scientia non olet · About LEMON Manuals