Mode F3 (Abs Snapshot)

Mode helps isolate intermittent problems by capturing data before and after condition.

By selecting Manual Trigger, Tech 1 will wait for ENTER to be pressed before storing speed sensor information. All stored information can be displayed and examined for conditions which might indicate a problem.

By selecting Automatic Trigger, Tech 1 will capture data which deviates from normal conditions, but alone may not set a code, such as driving over bumpy roads or over railroad tracks. Condition may be caused by loose connections or intermittent wiring problems. While Tech 1 is waiting for a trigger, the ENTER or F9 key may also be used to force a trigger.