LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1991 >> Roadmaster 4L60/MD8 >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Window Regulator >> Removal

Window Regulator: Removal

  1. Remove door trim panel. See TRIM PANEL  .
  2. Remove water deflector. See WATER DEFLECTOR  .
  3. Raise window glass (94) as necessary. Support window glass (94) in position needed to access rivets (96) by taping it to door frame using cloth-backed body tape. See Figure .
  4. Remove door latch module assembly. See DOOR LATCH MODULE ASSEMBLY  .
  5. Remove rivets (96) connecting window sash (92) to window regulator sash (95), using a drill and 5/16" drill bit.
  6. Remove screws (99) and reinforcement, if necessary, securing window regulator cam assembly (100 or 102) to door panel. See Figure for front doors or Figure for rear doors.
  7. Disconnect electrical connection.
  8. Remove rivets (97) securing window regulator (98 or 101) to door panel using a drill and 5/16"drill bit. See Figure for front doors or Figure for rear doors.
  9. Remove window regulator assembly.
scientia non olet · About LEMON Manuals