LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1991 >> Reatta 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Miscellaneous Controls >> Transmission (C-8) >> 1-4 Shift Relay (Man. Trans. Corvette)

1-4 Shift Relay (Man. Trans. Corvette)

  1. Turn ignition off. Disconnect 1-4 shift relay connector. Check for continuity between terminals "D" and "F" of relay. If continuity does not exist, replace relay. If continuity does exist, check for continuity between relay terminals "C" and "A". Continuity should also exist when relay is not energized. If not, replace relay.
  2. Energize relay by applying battery voltage to terminal "D" of relay and ground terminal "F". Check continuity between terminals "A" and "E". Continuity should exist while relay is energized. Replace relay if it does not test as described.
Fig 1: 1-4 Shift Relay Schematic (Corvette)
G90F13206Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals